Custom Shower Door Glass Installation in Atlanta: A Step-by-Step Timeline

Planning a custom shower door glass installation for your Atlanta, GA, home can feel overwhelming if you do not know what to expect. This guide walks you through every stage of the process, from the first consultation to your first shower, so you can plan with confidence. Contact us today at (770) 981-6365 and we can get your project scheduled.
Step 1: The Consultation and Measurement Visit
The process begins with an in-home consultation and precise measurement of your shower space. This step is more involved than most homeowners expect. Our team needs to assess the walls, floor, and framing to make sure the glass will fit perfectly.
During the visit, we review your options for glass type, thickness, and door style. Metro Atlanta homes often feature a range of shower sizes, from compact neo-angle corner units in older Buckhead condos to large walk-in configurations in newer Alpharetta and Johns Creek builds. Getting the measurements right the first time prevents costly adjustments later.
We also use this visit to confirm that your existing tile, curb, and plumbing are compatible with the door style you have in mind. If any modifications are needed, we flag them before fabrication begins.
Step 2: Glass Fabrication and Lead Time
Once measurements are confirmed, your glass panels go into fabrication. Custom glass is cut, edged, and tempered to your exact specifications. This stage typically takes one to two weeks, though timelines can vary depending on glass type and current shop volume.
Tempered safety glass is standard for shower enclosures and is required by Georgia building codes. If you choose a specialty option such as rain glass, frosted patterns, or low-iron ultra-clear glass, the lead time may extend slightly. Our team keeps you updated so there are no surprises.
This waiting period is a good time to complete any tile work or bathroom painting that needs to happen before the door goes in.
What Happens on Installation Day?
Installation day for a custom shower door glass installation in Atlanta, GA, typically runs two to four hours for a standard enclosure. Our installers arrive with all the hardware, glass panels, and tools needed to complete the job in a single visit.
Here is a general outline of what happens on-site:
- We lay down protective coverings to keep your tile and fixtures safe during the work.
- We anchor wall channels or clips into the studs or tile substrate at precise heights.
- We set, align, and secure glass panels according to the design spec.
- We attach and adjust hinges, handles, and towel bars for smooth operation.
- We apply silicone sealant along all contact points to prevent water intrusion.
The silicone application is the last step before we do a full inspection of the fit, swing, and seal.
Atlanta-Specific Permit Considerations
Most residential shower door replacements in Atlanta, GA, do not require a separate permit when the structural work is limited to the door itself. However, if your project involves moving walls, changing the shower pan, or altering plumbing, a Fulton County or DeKalb County permit may be required. We can advise you during the consultation on what may apply to your specific project.
Cure and Seal Time Before Your First Use
After installation, the silicone sealant needs time to cure before the shower is used. This period is typically 24 to 48 hours. Using the shower too soon can compromise the seal and lead to leaks along the base or wall channels.
We recommend keeping the area well ventilated during the curing period. Atlanta's humidity can slow drying times slightly in warmer months, so allowing the full 48 hours in summer is a smart practice.
Once the seal has cured, do a quick visual check of all contact points before running water. If anything looks off, call us before using the shower so we can assess it quickly.
Post-Installation Care for Your New Shower Door
Routine care can keep your shower glass looking clean and lasting for many years. A few simple habits make a big difference.
- Rinse the glass with warm water after each use to reduce mineral buildup.
- Use a squeegee after showering to prevent water spots from hard Atlanta-area water.
- Clean with a non-abrasive glass cleaner and a soft cloth on a weekly basis.
- Avoid harsh chemicals or abrasive pads that can damage any protective coating on the glass.
- Inspect the sealant along the base and walls every six to twelve months and report any gaps promptly.
For more detailed care tips, our guide on taking care of your new glass shower doors covers the essentials in one place.
If you want to explore your door style options before reaching out, our custom shower door glass installation page covers frameless, semi-frameless, and framed options we offer in the Atlanta area.
Wondering what other customers have experienced with our work? Check our Google Business Profile to read reviews from Atlanta-area homeowners who have been through the same process.
Ready to Get Started? Contact Parker & Son Screen & Glass Inc. Today
Now that you know what the custom shower door glass installation timeline looks like from start to finish, the next step is easy. We have been serving the Atlanta metro area since 1961, bringing decades of experience and craftsmanship to every custom shower door glass installation we complete.
Call us today at
(770) 981-6365 or
send us a message to request your free quote and get your project on the schedule.









